Skip to content

Home

Jump to bottom
Wolfgang edited this page May 23, 2024 · 9 revisions

Welcome to the DroneBridge for ESP32 wiki!

  1. Select supported hardware
  2. Wire to the flight controller
  3. Install firmware
  4. Configure DroneBridge for ESP32
  5. Configure Ground Station & Drone
  6. Logging & Debugging
  7. Troubleshooting

DroneBridge for ESP32 WiFi Blackbox

DroneBridge for ESP32 blackbox showing UDP and TCP port to connect to in order to receive serial data via UART

Further Support & Donations

If you benefited from this project please consider a donation:

For questions or general chatting regarding DroneBridge for ESP32 please visit the Discord channel

Clone this wiki locally