displacement

[brucebra]

Discussed in #1864

^{Originally posted by brucebra July 14, 2022}
hello all,
I'm having trouble with the outline moving in the x-direction from the hatch about every 4th time of lasering.

I edit my drawing in Inksape and delete everything there except the hatching. I save this as an SVG and open it in LaserGRBL. Then, in the preview I see that an outline has "emerged" around the hatching.

I would be interested to know how I can prevent this line from appearing. Maybe there are mistakes in my settings in LaserGRBL:

---

$0=10 (Step pulse time)
$1=25 (Step idle delay)
$2=0 (Step pulse invert)
$3=0 (Step direction invert)
$4=0 (Invert step enable pin)
$5=0 (Invert limit pins)
$6=0 (Invert probe pin)
$10=3 (Status report options)
$11=0.010 (Junction deviation)
$12=0.002 (Arc tolerance)
$13=0 (Report in inches)
$20=0 (Soft limits enable)
$21=0 (Hard limits enable)
$22=0 (Homing cycle enable)
$23=0 (Homing direction invert)
$24=25.000 (Homing locate feed rate)
$25=500.000 (Homing search seek rate)
$26=250 (Homing switch debounce delay)
$27=1.000 (Homing switch pull-off distance)
$100=80.000 (X-axis travel resolution)
$101=80.000 (Y-axis travel resolution)
$102=400.000 (Z-axis travel resolution)
$110=5000.000 (X-axis maximum rate)
$111=5000.000 (Y-axis maximum rate)
$112=5000.000 (Z-axis maximum rate)
$120=200.000 (X-axis acceleration)
$121=200.000 (Y-axis acceleration)
$122=200.000 (Z-axis acceleration)
$130=5000.000 (X-axis maximum travel)
$131=5000.000 (Y-axis maximum travel)
$132=5000.000 (Z-axis maximum travel)

---

the picture is showing the offset mistake.

Hopefully You have tipps for me.

Laser: Eleksmaker A3, 2.500 mW blue Laser

KR
Andreas