all.py

import time
from time import sleep
import os
import subprocess
import RPi.GPIO as GPIO

GPIO.setmode (GPIO.BCM) #BCM uses the GPIO numbers while BOARD uses the actual pin number
GPIO.setwarnings (False)

red = 10
green = 9
blue = 11
mosfet = 22
button1 = 17
button2 = 18
button3 = 27

in4 = 4
in14 = 14
in15 = 15
in7 = 7
in21 = 21
in20 = 20
in19 = 19
in13 = 13
in12 = 12

GPIO.setup(red,GPIO.OUT)
GPIO.setup(green,GPIO.OUT)
GPIO.setup(blue,GPIO.OUT)
GPIO.setup(mosfet,GPIO.OUT)
GPIO.setup(button1, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(button2, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(button3, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(in4, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(in14, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(in15, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(in7, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(in21, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(in20, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(in19, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(in13, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(in12, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)

print "*~*~* Start testing LEDs *~*~*"
print ""

print "Green LED on"
GPIO.output(green,GPIO.HIGH)
time.sleep(2)
print "Green LED off"
GPIO.output(green,GPIO.LOW)

print "Red LED on"
GPIO.output(red,GPIO.HIGH)
time.sleep(2)
print "Red LED off"
GPIO.output(red,GPIO.LOW)

print "Blue LED on"
GPIO.output(blue,GPIO.HIGH)
time.sleep(2)
print "Blue LED off"
GPIO.output(blue,GPIO.LOW)

print ""
print "Finished testing LEDs!"
print ""

print "*~*~* Start testing MOSFET *~*~*"
print ""

print "MOSFET on"
GPIO.output(mosfet,GPIO.HIGH)
time.sleep(2)
print "MOSFET off"
GPIO.output(mosfet,GPIO.LOW)

print ""
print "Finished testing MOSFET!"
print ""

print "*~*~* Start testing RTC *~*~*"
print ""

subprocess.call(["sudo", "hwclock", "--systohc"])
subprocess.call(["sudo", "hwclock", "--verbose", "-r"])

print ""
print "Finished testing RTC!"
print ""

print "*~*~* Starting button tests *~*~*"
print ""

print "Waiting for button 1 press..."
while GPIO.input(button1) == False:
    time.sleep(0.1)

print "Button 1 pressed!"

print ""
print "Waiting for button 2 press..."
while GPIO.input(button2) == False:
    time.sleep(0.1)

print "Button 2 pressed!"

print ""
print "Waiting for button 3 press..."
while GPIO.input(button3) == False:
    time.sleep(0.1)

print "Button 3 pressed!"

print ""
print "Finished testing buttons!"
print ""

print "*~*~* Start testing GPIO inputs *~*~*"
print ""

print "Waiting for input on GPIO4"
while (GPIO.input(in4) == False):
	time.sleep(0.1)
print "Input on GPIO 4 detected"

print ""
print "Waiting for input on GPIO14"
while (GPIO.input(in14) == False):
	time.sleep(0.1)
print "Input on GPIO 14 detected"

print ""
print "Waiting for input on GPIO15"
while (GPIO.input(in15) == False):
	time.sleep(0.1)
print "Input on GPIO 15 detected"

print ""
print "Waiting for input on GPIO7"
while (GPIO.input(in7) == False):
	time.sleep(0.1)
print "Input on GPIO 7 detected"

print ""
print "Waiting for input on GPIO21"
while (GPIO.input(in21) == False):
	time.sleep(0.1)
print "Input on GPIO 21 detected"

print ""
print "Waiting for input on GPIO20"
while (GPIO.input(in20) == False):
	time.sleep(0.1)
print "Input on GPIO 20 detected"

print ""
print "Waiting for input on GPIO19"
while (GPIO.input(in19) == False):
	time.sleep(0.1)
print "Input on GPIO 19 detected"

print ""
print "Waiting for input on GPIO13"
while (GPIO.input(in13) == False):
	time.sleep(0.1)
print "Input on GPIO 13 detected"

print ""
print "Waiting for input on GPIO12"
while (GPIO.input(in12) == False):
	time.sleep(0.1)
print "Input on GPIO 12 detected"

print ""
print "Finished testing inputs!"
print ""
print "Exiting... goodbye!"
print ""

GPIO.cleanup()