Which build/asset is most suitable for Voxlab Aquila with BTT SKR mini E3 V3 board?

[shumtravi]

Hello! I plan to convert my custom Aquilas to SKR Mini E3 V3 boards. With the original boards I used the firmware Aquila_GD32_MM-ProUI-IS-MPC.bin and after installing the CR-touch sensors i used Aquila_GD32_UBL-5x5-NoPro-IS-MPC.bin

Now I want to transfer Aquilas to the SKR Mini E3 V3 boards and I have a question: which build should I choose if I need IS, LA, MPC, UBL using the CR-touch sensor, Aquilas DWIN display? And the next questions is, will the hotend fan be auto-controllable with the SKR board? Will the DWIN display work with SKR mini E3V3?

[classicrocker883]

sorry for the late reply. so at this point it should not matter what board you can use. the main thing to look out for is having a mainboard chip large enough to be able to use all the features. the original Aquila boards are limited to 256KB. the Mini E3 V3 has 512KB or twice as much memory it can store. which is more than enough to run all the firmware features.

you will need this adapter cable to use a DWIN screen.

I am not familiar with the SKR mini board like I am with the Creality 427. I do suggest the 427 as a near stock replacement, and a sort of upgrade. I know the SKR mini uses many different settings and such, but you should be able to use ProUI on it because I have firmware .bin files for it. as for the auto fan control, I do not know. Im sure if its possible to use then all you need to do is adjust some settings in the configuration files. but I do not think the ProUI interface has a menu option to control that.

in order to use IS, LA, MPC, UBL, just look for those in the firmware .bin file. All should have LA enabled.

for the 427 and SKR Mini, I'll have to get back to you to check if all those are enabled.