Mitsubishi Outlander and HEMS configuration question

[profigriller]

I am starting with evcc and I am strungeling a bit with the yaml configuration.
EVCC is running in docker and comes up fine.
I have 2 questions:

1. We have a Mitsubishi Outlander with 10 kWh battery. This model is not listed at vehicles. Can I configure to use EVCC to e.g. load e.g. 5kWh or 50% of capacity?
2. We have SAM Sunny Home Manager with Tripower inverter. PV and grid meters work ok. Charger is go-e.
   I want to use HEMS with SMA. As soon as I add the hems entry I get the following error.
   I am pretty sure that the problem is in front of the PC.

• 'HEMS' expected a map, got 'slice'
  [main ] FATAL 2021/02/20 15:33:47 failed parsing config file /etc/evcc.yaml: 1 error(s) decoding:

uri: 0.0.0.0:7070 # uri for ui
interval: 20s # control cycle interval

chargers:

• name: goalt
  type: go-e
  uri: http://192.168.123.83

meters:

• name: pvshm
  type: sma
  uri: 192.168.123.59
• name: tripower
  type: modbus
  uri: 192.168.123.98
  id: 126

site:

• title: Home # display name for UI
  meters:
  pv: tripower # pv meter
  grid: pvshm

loadpoints:

• title: Garagealt # display name for UI
  charger: goalt
  phases: 1 # ev phases (default 3)
  mode: pv
  guardduration: 5m # switch charger contactor not more often than this (default 10m)
  mincurrent: 6 # minimum charge current (default 6A)
  maxcurrent: 16 # maximum charge current (default 16A)

hems:

• type: sma
  allowcontrol: false # set true to allow SHM controlling charger in PV modes

[premultiply]

hems:
  type: shm
  allowcontrol: false

[andig]

Since the underlying library is in C it should be possible to bundle this into a Go module and achieve native support in evcc. However, somebody (with C background) would need to do that. Its not on my priority list.

[premultiply]

Keep in mind that this seems to be WiFi only from what I read.
A special WiFi-Client-Router placed next to the car needs to be connected to the WiFi-AP in the car.

[bicaluv]

hems:
type: shm
allowcontrol: false

Which type is correct? sma or shm?
In die documentation https://github.com/andig/evcc#home-energy-management-system, one can read sma

[premultiply]

https://github.com/andig/evcc/blob/1634d4e4405e476c63dc6a0e5fa98727bc64b8bc/hems/config.go#L22

Both are correct. You can even call it as type: semp

[profigriller]

I have a bluetooth dongle to read the values from the car. May this can be used to get a SOC when parking the car. I will have a play with this but this will take time.