readme.txt

                          _____    
                         |_   _|   
  ___ _ __ ___   ___  _ __ | |_  __
 / _ \ '_ ` _ \ / _ \| '_ \| \ \/ /
|  __/ | | | | | (_) | | | | |>  < 
 \___|_| |_| |_|\___/|_| |_\_/_/\_\
                                                  
Wireless energy-monitoring node 

http://openenergymonitor.org/emon/emontx
***********************************

Builds on JeeLabs software and compatiable with JeeNode hardware 
------------------------------------------------------------------------
These examples require the following librarys - download and insert into Arduino librarys folder 
https://github.com/openenergymonitor/EmonLib
http://github.com/jcw/jeelib

Temperature monitoring needs the following: 
Temperature controll library: http://download.milesburton.com/Arduino/MaximTemperature/ (version 372 works with Arduino 1.0) 
and OneWire library: http://www.pjrc.com/teensy/td_libs_OneWire.html

-------------------------------------------------------------------------

emonTx_CT123 - Apparent Power Example - Use this example if only using CT sensors. Monitors AC current using one CT sensor and transmitt data via wireless using RFM12B to emonBase. 

emonTx_CT123_Voltage - Real Power - Use this example if using an AC-AC adapter with as well as CT sensors. AC-AC plug-in adapter to monitors AC RMS voltage and give real power and current direction readings. 

emonTx_Pulse - Use for counting pulses from pulse output utility meter (flashing LED). Optical sensor can be used to detect pulses. 

emonTx_Temperature - For using multiple DS18B20 temperature sensors on a one-wire bus with emonTx. Uses direct addressing method, run the 'temperature search' sketch to find the addresses of the DS18B20 sensors and insert into main example. http://openenergymonitor.org/emon/buildingblocks/DS18B20-temperature-sensing


Note: CT must be clipped round either the Live or Neutral wire, not both! 

When the example has been succesfully uploaded the green LED should blink quickly once very 10's