002: HW Validation List

Summary

This note shares the list of validated hardware configurations. Note that our open source community never guarantee it works fine. This list just informs you the following hardware configuration passed the validation test sponsored by the provider. Please contact to the provider for shipping availability and commercial support.

Hardware Validation List

This section shows a list of complete systems which we have validated.

SuperServer SYS-1019GP-TT

Component List:

Type	Parts Name	# of items	Memo
Barebone	SYS-1019GP-TT	1	1U Rack Server
CPU	Intel Xeon Gold 6126T	1	12C,24HT,2.6GHz
RAM	DDR4-2666 32GB DIMM	6	192GB in total
GPU	NVIDIA Tesla P40	1	3840C, 24GB, Pascal
SSD	Intel DC P4600	3	2.0TB, HHHL
HDD	SATA 2.0TB (2.5inch; 7.2krpm)	6
N/W	Built-in 10Gb ethernet	2

• Installation Note
  • NVIDIA Tesla P40 GPU is installed on the left PCIe slot (x16) from the rear.
  • Intel DC P4600 SSDs are installed on the center PCIe slot (x16), right upper/lower PCIe slot (x8) (by riser card) from the rear.
• Provider Info
  • HeteroDB,Inc
  • Location: Tokyo/Japan
  • Contact: contact@heterodb.com

Software Support List

General Requirement

• Operating System
  • Red Hat Enterprise Server 7.3 or later (x86_64)
  • CentOS 7.3 or later (x86_64)
• CUDA Toolkit
  • NVIDIA CUDA Toolkit 9.2
• PostgreSQL
  • PostgreSQL v9.6.x
  • PostgreSQL v10.x

FYI: NVMe-SSD models which we had run

This section shows a list of NVMe-SSD systems which we have tested in the past.

Vendor	Model	Form	Capacity	SeqRead [MB/s]	PCIe Spec	Memo
Intel	750 SSD	HHHL	400GB	2200MB/s	PCIe 3.0 x4
Samsung	PRO 960SSD	M.2	512GB	3500MB/s	PCIe 3.0 x4	using carrier board
HGST	SN260	HHHL	7.6TB	6100MB/s	PCIe 3.0 x8
Intel	DC P4600	HHHL	2.0TB	3200MB/s	PCIe 3.0 x4
Intel	DC P4511	M.2	1.0TB	1950MB/s	PCIe 3.0 x4	using carrier board