Nibe heatpump going in alert mode. Log: "due to parse error" -> "wrong checksum"

[Peterfin-EK]

The problem

I installed today Nibe Heatpump integration and it's working, so that I am getting data from F1255 with default ports. So quite well already as this was my first ESPhome project :)
-Nibe has latest firmware and connected to myuplink
-HA has all latest modules installed (platform Raspberry Pi 5)

I am using same board and original example configuration, just modifing my network etc (static IP added): lilygo-t-can485.yaml.
https://github.com/elupus/esphome-nibe/tree/master/examples

Issue: Nibe pump is giving alert after an hour or so. Nibe integration log as attachment.

Log is getting lot of these "due to parse error" -> "wrong checksum". Could wifi connection be too poor?

2025-01-13 21:40:59.290 WARNING (MainThread) [nibe.nibe.connection.nibegw] Ignoring packet from ('192.168.8.75', 9999) due to parse error: 5c00206850ffff0000ffff0000ffff0000ffff0000ffff0000ffff0000ffff0000ffff0000ff0000ffff0000ffff0000ffff0000ffff0000ffff0000ffff0000ffff0000ffff0000ffff0000ffff0000ffff0000185c: Error in path (parsing) -> data -> checksum
wrong checksum, read 92, computed 255

What version of Home Assistant Core has the issue?

core-2025.1.2

What was the last working version of Home Assistant Core?

No response

What type of installation are you running?

Home Assistant OS

Integration causing the issue

nibe_heatpump

Link to integration documentation on our website

https://github.com/home-assistant/core/issues?q=is%3Aissue+is%3Aopen+label%3A%22integration%3A+nibe_heatpump%22

Diagnostics information

home-assistant_nibe_heatpump_2025-01-13T19-58-52.550Z.log

Example YAML snippet

No response

Anything in the logs that might be useful for us?

No response

Additional information

No response

[home-assistant]

Hey there @elupus, mind taking a look at this issue as it has been labeled with an integration (nibe_heatpump) you are listed as a code owner for? Thanks!

Code owner commands

Code owners of nibe_heatpump can trigger bot actions by commenting:

• @home-assistant close Closes the issue.
• @home-assistant rename Awesome new title Renames the issue.
• @home-assistant reopen Reopen the issue.
• @home-assistant unassign nibe_heatpump Removes the current integration label and assignees on the issue, add the integration domain after the command.
• @home-assistant add-label needs-more-information Add a label (needs-more-information, problem in dependency, problem in custom component) to the issue.
• @home-assistant remove-label needs-more-information Remove a label (needs-more-information, problem in dependency, problem in custom component) on the issue.

_{^{(message by CodeOwnersMention)}}

---

nibe_heatpump documentation
nibe_heatpump source
_{^{(message by IssueLinks)}}