Skip to content

Latest commit

 

History

History
43 lines (26 loc) · 1.8 KB

adjustable_slit.md

File metadata and controls

43 lines (26 loc) · 1.8 KB

Adjustable Slit

Cube insert

{{BOM}}

This flex mechanism helps to control the pass of the light beam by adjusting the top knob.

! This component is still being tested

#Assembly

Step 1:

Take the Compliant-slit flex - layer 1{qty: 1, cat: PrintedPart} and join it with the Compliant-slit flex - layer 2{qty: 1, cat: PrintedPart}, leaving the Blades{qty:1} and the HEX screw{qty:1} in the middle of them. The idea is to leave captured the head of the screw and the sharp edges of the blades in the center.

Step 2;

Put two M3 x 5mm screw{qty: 1} through the assembled piece to hold the blades previously inserted and tight with the 2.5mm Ball-end Allen key{qty:1}.

Step 3:

Place the cap{qty: 1, cat: PrintedPart}, closing the mechanism.

Step 4:

Paste the Knob{qty: 1, cat: PrintedPart} with the screw tip using a strong glue.

##Step 5: Put it in a cube!

Take one of your UC2 cubes and place your assembled piece in it. You can purchase the cube or 3D print it, either option works fine.