launcher

#!/bin/bash

command=$1
config=$2
config_file=containers/"$config".yml
cidfile=cids/"$config".cid
cidbootstrap=cids/"$config"_boostrap.cid
local_discourse=local_discourse
image=samsaffron/discourse:0.1.2
docker_path=`which docker`

docker_ip=`/sbin/ifconfig | \
                grep -B1 "inet addr" | \
                awk '{ if ( $1 == "inet" ) { print $2 } else if ( $2 == "Link" ) { printf "%s:" ,$1 } }' | \
                grep docker0 | \
                awk -F: '{ print $3 }';`


usage () {
  echo "Usage: launcher COMMAND CONFIG"
  echo "Commands:"
  echo "    start:      Start/initialize a container"
  echo "    stop:       Stop a running container"
  echo "    restart:    Restart a container"
  echo "    destroy:    Stop and remove a container"
  echo "    ssh:        Start a bash shell in a running container"
  echo "    logs:       Docker logs for container"
  echo "    bootstrap:  Bootstrap a container for the config based on a template"
  exit 1
}

prereqs() {

  # 1. docker daemon running?
  test=`docker info >/dev/null`

  if [[ $? -ne 0 ]] ; then
    echo "Cannot connect to the docker daemon - verify it is running and you have access"
    exit 1
  fi

  # 2. running aufs
  test=`docker info 2> /dev/null | grep 'Driver: aufs'`
  if [[ "$test" =~ "aufs" ]] ; then : ; else
    echo "Your Docker installation is not using aufs"
    echo "Device mapper and other experimental drivers are unstable"
    echo
    echo "Please ensure your kernel is running linux extras and aufs"
    echo "Please follow the installation guide for Docker here: http://docs.docker.io/en/latest/installation/ubuntulinux/"
    exit 1
  fi

  # 3. running docker 0.9+
  test=`docker --version | grep 0.9`

  if [[ "$test" =~ "0.9" ]] ; then : ; else
    echo "Your Docker installation is old, please upgrade to 0.9.0 or up"
    exit 1
  fi

  # 4. able to attach stderr / out / tty
  test=`docker run -i --rm -a stdin -a stdout -a stderr $image echo working`
  if [[ "$test" =~ "working" ]] ; then : ; else
    echo "Your Docker installation is not working correctly"
    echo
    echo "See: https://meta.discourse.org/t/docker-error-on-bootstrap/13657/18?u=sam"
    exit 1
  fi
}

prereqs

get_ssh_pub_key() {
  if tty -s ; then
    if [[ ! -e ~/.ssh/id_rsa.pub && ! -e ~/.ssh/id_dsa.pub ]] ; then
      echo You have no SSH key associated to this profile
      echo "(This will allow you ssh access into your container)"
      read -p "Generate SSH key at ~/.ssh/id_rsa.pub? (y/N) " -n 1 -r
      if [[ $REPLY =~ ^[Yy]$ ]] ; then
        echo
        echo Generating SSH key
        mkdir -p ~/.ssh && ssh-keygen -f ~/.ssh/id_rsa -t rsa -N ''
      else
        echo
        echo WARNING: You may not be able to log in to your container.
        echo
      fi
    fi
  fi

  ssh_pub_key="$(cat ~/.ssh/id_rsa.pub 2>/dev/null || cat ~/.ssh/id_dsa.pub)"
}


install_docker() {

  echo "Docker is not installed, make sure you are running on the 3.8 kernel"
  echo "The best supported Docker release is Ubuntu 12.04.03 for it run the following"
  echo
  echo "sudo apt-get update"
  echo "sudo apt-get install linux-image-generic-lts-raring linux-headers-generic-lts-raring"
  echo "sudo reboot"
  echo

  echo "sudo sh -c \"wget -qO- https://get.docker.io/gpg | apt-key add -\""
  echo "sudo sh -c \"echo deb http://get.docker.io/ubuntu docker main > /etc/apt/sources.list.d/docker.list\""
  echo "sudo apt-get update"
  echo "sudo apt-get install lxc-docker"

  exit 1
}

set_volumes() {
  volumes=`cat $config_file | docker run --rm -i -a stdout -a stdin $image ruby -e \
        "require 'yaml'; puts YAML.load(STDIN.readlines.join)['volumes'].map{|v| '-v ' << v['volume']['host'] << ':' << v['volume']['guest'] << ' '}.join"`
}

set_template_info() {

    templates=`cat $config_file | docker run --rm -i -a stdin -a stdout $image ruby -e \
      "require 'yaml'; puts YAML.load(STDIN.readlines.join)['templates']"`


    arrTemplates=(${templates// / })
    config_data=$(cat $config_file)

    input="hack: true"


    for template in "${arrTemplates[@]}"
    do
      [ ! -z $template ] && {
        input="$input _FILE_SEPERATOR_ $(cat $template)"
      }
    done

    # we always want our config file last so it takes priority
    input="$input _FILE_SEPERATOR_ $config_data"

    read -r -d '' env_ruby << 'RUBY'
    require 'yaml'

    input=STDIN.readlines.join
    env = {}
    input.split('_FILE_SEPERATOR_').each do |yml|
       yml.strip!
       begin
         env.merge!(YAML.load(yml)['env'] || {})
       rescue => e
        puts yml
        p e
       end
    end
    puts env.map{|k,v| "-e\n#{k}=#{v}" }.join("\n")
RUBY

    raw=`exec echo "$input" | docker run --rm -i -a stdin -a stdout $image ruby -e "$env_ruby"`

    env=()
    while read i; do
      env[${#env[@]}]=$i
    done <<< "$raw"

    echo "Calculated ENV: ${env[@]}"
}

[ -z $docker_path ] && {
  install_docker
}


[ $# -ne 2 ] && {
  usage
}

if [ ! -e $config_file ]
  then
    echo "Config file was not found, ensure $config_file exists"
    exit 1
fi


run_stop(){
  if [ ! -e $cidfile ]
     then
       echo "No cid found"
       exit 1
     else
       docker stop -t 10 `cat $cidfile`
  fi
}

run_start(){

  if [ ! -e $cidfile ]
     then
       echo "No cid found, creating a new container"
       ports=`cat $config_file | docker run --rm -i -a stdout -a stdin $image ruby -e \
              "require 'yaml'; puts YAML.load(STDIN.readlines.join)['expose'].map{|p| '-p ' << p.to_s << ' '}.join"`

       set_template_info
       set_volumes

       existing=`docker ps -a | awk '{ print $1, $(NF) }' | grep "$config$" | awk '{ print $1 }'`
       if [ ! -z $existing ]
       then
         echo "Found an existing container by its name, recovering cidfile, please rerun"
         echo $existing > $cidfile
         exit 1
       fi

       docker run "${env[@]}" -h "`hostname`-$config" -e DOCKER_HOST_IP=$docker_ip --name $config -t --cidfile $cidfile $ports \
                  -d $volumes $local_discourse/$config /usr/bin/runsvdir -P /etc/service

       exit 0
     else
       cid=`cat $cidfile`

       if [ -z $cid ]
       then
         echo "Detected empty cid file, deleting, please re-run"
         rm $cidfile
         exit 1
       fi

       found=`docker ps -q -a --no-trunc | grep $cid`
       if [ -z $found ]
       then
         echo "Invalid cid file, deleting, please re-run"
         rm $cidfile
         exit 1
       fi

       echo "cid found, ensuring container is started"
       docker start `cat $cidfile`
       exit 0
  fi

}

case "$command" in
  bootstrap)

      get_ssh_pub_key

      # Is the image available?
      # If not, pull it here so the user is aware what's happening.
      docker history $image >/dev/null 2>&1 || docker pull $image

      set_template_info

      base_image=`cat $config_file | docker run --rm -i -a stdin -a stdout $image ruby -e \
        "require 'yaml'; puts YAML.load(STDIN.readlines.join)['base_image']"`

      update_pups=`cat $config_file | docker run --rm -i -a stdin -a stdout $image ruby -e \
        "require 'yaml'; puts YAML.load(STDIN.readlines.join)['update_pups']"`

      if [[ ! X"" = X"$base_image" ]]; then
        image=$base_image
      fi

      set_volumes

      rm -f $cidbootstrap

      run_command="cd /pups &&"
      if [[ ! "false" =  $update_pups ]]; then
        run_command="$run_command git pull &&"
      fi
      run_command="$run_command /pups/bin/pups --stdin"

      echo $run_command

      env=("${env[@]}" "-e" "SSH_PUB_KEY=$ssh_pub_key")

      (exec echo "$input" | docker run "${env[@]}" -e DOCKER_HOST_IP=$docker_ip --cidfile $cidbootstrap -i -a stdin -a stdout -a stderr $volumes $image \
         /bin/bash -c "$run_command") \
         || (docker rm `cat $cidbootstrap` && rm $cidbootstrap)

      [ ! -e $cidbootstrap ] && echo "FAILED TO BOOTSTRAP" && exit 1

      sleep 5

      docker commit `cat $cidbootstrap` $local_discourse/$config || echo 'FAILED TO COMMIT'
      docker rm `cat $cidbootstrap` && rm $cidbootstrap

      echo "Successfully bootstrapped, to startup use ./launcher start $config"
      exit 0
      ;;

  ssh)
      if [ ! -e $cidfile ]
         then
           echo "No cid found"
           exit 1
         else
           cid="`cat $cidfile`"
           address="`docker port $cid 22`"
           split=(${address//:/ })
           exec ssh -o StrictHostKeyChecking=no root@${split[0]} -p ${split[1]}
      fi
      ;;

  stop)
      run_stop
      exit 0
      ;;

  logs)

      if [ ! -e $cidfile ]
         then
           echo "No cid found"
           exit 1
         else
           docker logs `cat $cidfile`
           exit 0
      fi
      ;;

  restart)
      run_stop
      run_start
      exit 0
      ;;

  start)
      run_start
      exit 0
      ;;


  destroy)
      if [ -e $cidfile ]
        then
          echo "destroying container $cidfile"
          docker stop -t 10 `cat $cidfile`
          docker rm `cat $cidfile` && rm $cidfile
          exit 0
        else
          echo "nothing to destroy cidfile does not exist"
          exit 1
      fi
      ;;
esac

usage