Merge 4.4.243 of google/android-4.4-p into android-9.0

Repo: https://android.googlesource.com/kernel/common/+/refs/heads/android-4.4-p @ d09244e

Makefile

@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 4
-SUBLEVEL = 241
+SUBLEVEL = 243
 EXTRAVERSION =
 NAME = Blurry Fish Butt
 

arch/arc/kernel/entry.S

@@ -168,6 +168,7 @@ END(EV_Extension)
 tracesys:
 	; save EFA in case tracer wants the PC of traced task
 	; using ERET won't work since next-PC has already committed
+	lr  r12, [efa]
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r11
 	st  r12, [r11, THREAD_FAULT_ADDR]	; thread.fault_address
 
@@ -210,9 +211,15 @@ tracesys_exit:
 ; Breakpoint TRAP
 ; ---------------------------------------------
 trap_with_param:
-	mov r0, r12	; EFA in case ptracer/gdb wants stop_pc
+
+	; stop_pc info by gdb needs this info
+	lr  r0, [efa]
 	mov r1, sp
 
+	; Now that we have read EFA, it is safe to do "fake" rtie
+	;   and get out of CPU exception mode
+	FAKE_RET_FROM_EXCPN
+
 	; Save callee regs in case gdb wants to have a look
 	; SP will grow up by size of CALLEE Reg-File
 	; NOTE: clobbers r12
@@ -239,17 +246,16 @@ ENTRY(EV_Trap)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r12, [efa]
-
-	FAKE_RET_FROM_EXCPN
-
 	;============ TRAP 1   :breakpoints
 	; Check ECR for trap with arg (PROLOGUE ensures r9 has ECR)
 	bmsk.f 0, r9, 7
 	bnz    trap_with_param
 
 	;============ TRAP  (no param): syscall top level
 
+	; First return from Exception to pure K mode (Exception/IRQs renabled)
+	FAKE_RET_FROM_EXCPN
+
 	; If syscall tracing ongoing, invoke pre-post-hooks
 	GET_CURR_THR_INFO_FLAGS   r10
 	btst r10, TIF_SYSCALL_TRACE

arch/arc/kernel/stacktrace.c

@@ -113,7 +113,7 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 		int (*consumer_fn) (unsigned int, void *), void *arg)
 {
 #ifdef CONFIG_ARC_DW2_UNWIND
-	int ret = 0;
+	int ret = 0, cnt = 0;
 	unsigned int address;
 	struct unwind_frame_info frame_info;
 
@@ -133,6 +133,11 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 			break;
 
 		frame_info.regs.r63 = frame_info.regs.r31;
+
+		if (cnt++ > 128) {
+			printk("unwinder looping too long, aborting !\n");
+			return 0;
+		}
 	}
 
 	return address;		/* return the last address it saw */

arch/arm/Kconfig

@@ -688,7 +688,9 @@ config ARCH_S3C24XX
 	select HAVE_S3C_RTC if RTC_CLASS
 	select MULTI_IRQ_HANDLER
 	select NEED_MACH_IO_H
+	select S3C2410_WATCHDOG
 	select SAMSUNG_ATAGS
+	select WATCHDOG
 	help
 	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
 	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST

arch/arm/boot/dts/s5pv210.dtsi

@@ -99,19 +99,16 @@
 		};
 
 		clocks: clock-controller@e0100000 {
-			compatible = "samsung,s5pv210-clock", "simple-bus";
+			compatible = "samsung,s5pv210-clock";
 			reg = <0xe0100000 0x10000>;
 			clock-names = "xxti", "xusbxti";
 			clocks = <&xxti>, <&xusbxti>;
 			#clock-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+		};
 
-			pmu_syscon: syscon@e0108000 {
-				compatible = "samsung-s5pv210-pmu", "syscon";
-				reg = <0xe0108000 0x8000>;
-			};
+		pmu_syscon: syscon@e0108000 {
+			compatible = "samsung-s5pv210-pmu", "syscon";
+			reg = <0xe0108000 0x8000>;
 		};
 
 		pinctrl0: pinctrl@e0200000 {
@@ -228,43 +225,36 @@
 			status = "disabled";
 		};
 
-		audio-subsystem {
-			compatible = "samsung,s5pv210-audss", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clk_audss: clock-controller@eee10000 {
-				compatible = "samsung,s5pv210-audss-clock";
-				reg = <0xeee10000 0x1000>;
-				clock-names = "hclk", "xxti",
-						"fout_epll",
-						"sclk_audio0";
-				clocks = <&clocks DOUT_HCLKP>, <&xxti>,
-						<&clocks FOUT_EPLL>,
-						<&clocks SCLK_AUDIO0>;
-				#clock-cells = <1>;
-			};
+		clk_audss: clock-controller@eee10000 {
+			compatible = "samsung,s5pv210-audss-clock";
+			reg = <0xeee10000 0x1000>;
+			clock-names = "hclk", "xxti",
+				      "fout_epll",
+				      "sclk_audio0";
+			clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+				 <&clocks FOUT_EPLL>,
+				 <&clocks SCLK_AUDIO0>;
+			#clock-cells = <1>;
+		};
 
-			i2s0: i2s@eee30000 {
-				compatible = "samsung,s5pv210-i2s";
-				reg = <0xeee30000 0x1000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <16>;
-				dma-names = "rx", "tx", "tx-sec";
-				dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
-				clock-names = "iis",
-						"i2s_opclk0",
-						"i2s_opclk1";
-				clocks = <&clk_audss CLK_I2S>,
-						<&clk_audss CLK_I2S>,
-						<&clk_audss CLK_DOUT_AUD_BUS>;
-				samsung,idma-addr = <0xc0010000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2s0_bus>;
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
+		i2s0: i2s@eee30000 {
+			compatible = "samsung,s5pv210-i2s";
+			reg = <0xeee30000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <16>;
+			dma-names = "rx", "tx", "tx-sec";
+			dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+			clock-names = "iis",
+				      "i2s_opclk0",
+				      "i2s_opclk1";
+			clocks = <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_DOUT_AUD_BUS>;
+			samsung,idma-addr = <0xc0010000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
 		};
 
 		i2s1: i2s@e2100000 {

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -137,7 +137,7 @@
 			trips {
 				cpu_alert0: cpu_alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};

arch/arm/plat-samsung/Kconfig

@@ -239,6 +239,7 @@ config SAMSUNG_PM_DEBUG
 	bool "Samsung PM Suspend debug"
 	depends on PM && DEBUG_KERNEL
 	depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
+	depends on DEBUG_LL && MMU
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>

arch/arm64/Kconfig.platforms

@@ -9,6 +9,7 @@ config ARCH_BERLIN
 	bool "Marvell Berlin SoC Family"
 	select ARCH_REQUIRE_GPIOLIB
 	select DW_APB_ICTL
+	select DW_APB_TIMER_OF
 	help
 	  This enables support for Marvell Berlin SoC Family
 

arch/ia64/kernel/Makefile

@@ -42,7 +42,7 @@ endif
 obj-$(CONFIG_INTEL_IOMMU)	+= pci-dma.o
 obj-$(CONFIG_SWIOTLB)		+= pci-swiotlb.o
 
-obj-$(CONFIG_BINFMT_ELF)	+= elfcore.o
+obj-$(CONFIG_ELF_CORE)		+= elfcore.o
 
 # fp_emulate() expects f2-f5,f16-f31 to contain the user-level state.
 CFLAGS_traps.o  += -mfixed-range=f2-f5,f16-f31

arch/powerpc/platforms/powernv/opal-dump.c

@@ -385,13 +385,12 @@ static irqreturn_t process_dump(int irq, void *data)
 {
 	int rc;
 	uint32_t dump_id, dump_size, dump_type;
-	struct dump_obj *dump;
 	char name[22];
 	struct kobject *kobj;
 
 	rc = dump_read_info(&dump_id, &dump_size, &dump_type);
 	if (rc != OPAL_SUCCESS)
-		return rc;
+		return IRQ_HANDLED;
 
 	sprintf(name, "0x%x-0x%x", dump_type, dump_id);
 
@@ -403,12 +402,10 @@ static irqreturn_t process_dump(int irq, void *data)
 	if (kobj) {
 		/* Drop reference added by kset_find_obj() */
 		kobject_put(kobj);
-		return 0;
+		return IRQ_HANDLED;
 	}
 
-	dump = create_dump_obj(dump_id, dump_size, dump_type);
-	if (!dump)
-		return -1;
+	create_dump_obj(dump_id, dump_size, dump_type);
 
 	return IRQ_HANDLED;
 }

arch/powerpc/platforms/powernv/opal-elog.c

@@ -183,14 +183,14 @@ static ssize_t raw_attr_read(struct file *filep, struct kobject *kobj,
 	return count;
 }
 
-static struct elog_obj *create_elog_obj(uint64_t id, size_t size, uint64_t type)
+static void create_elog_obj(uint64_t id, size_t size, uint64_t type)
 {
 	struct elog_obj *elog;
 	int rc;
 
 	elog = kzalloc(sizeof(*elog), GFP_KERNEL);
 	if (!elog)
-		return NULL;
+		return;
 
 	elog->kobj.kset = elog_kset;
 
@@ -223,18 +223,37 @@ static struct elog_obj *create_elog_obj(uint64_t id, size_t size, uint64_t type)
 	rc = kobject_add(&elog->kobj, NULL, "0x%llx", id);
 	if (rc) {
 		kobject_put(&elog->kobj);
-		return NULL;
+		return;
 	}
 
+	/*
+	 * As soon as the sysfs file for this elog is created/activated there is
+	 * a chance the opal_errd daemon (or any userspace) might read and
+	 * acknowledge the elog before kobject_uevent() is called. If that
+	 * happens then there is a potential race between
+	 * elog_ack_store->kobject_put() and kobject_uevent() which leads to a
+	 * use-after-free of a kernfs object resulting in a kernel crash.
+	 *
+	 * To avoid that, we need to take a reference on behalf of the bin file,
+	 * so that our reference remains valid while we call kobject_uevent().
+	 * We then drop our reference before exiting the function, leaving the
+	 * bin file to drop the last reference (if it hasn't already).
+	 */
+
+	/* Take a reference for the bin file */
+	kobject_get(&elog->kobj);
 	rc = sysfs_create_bin_file(&elog->kobj, &elog->raw_attr);
-	if (rc) {
+	if (rc == 0) {
+		kobject_uevent(&elog->kobj, KOBJ_ADD);
+	} else {
+		/* Drop the reference taken for the bin file */
 		kobject_put(&elog->kobj);
-		return NULL;
 	}
 
-	kobject_uevent(&elog->kobj, KOBJ_ADD);
+	/* Drop our reference */
+	kobject_put(&elog->kobj);
 
-	return elog;
+	return;
 }
 
 static irqreturn_t elog_event(int irq, void *data)

arch/powerpc/platforms/powernv/smp.c

@@ -41,7 +41,7 @@
 #include <asm/udbg.h>
 #define DBG(fmt...) udbg_printf(fmt)
 #else
-#define DBG(fmt...)
+#define DBG(fmt...) do { } while (0)
 #endif
 
 static void pnv_smp_setup_cpu(int cpu)