build: migrate to create-typescript-app@1 (#102)

## PR Checklist

- [x] Addresses an existing open issue: fixes #100
- [x] That issue was marked as [`status: accepting
prs`](https://github.com/JoshuaKGoldberg/all-contributors-for-repository/issues?q=is%3Aopen+is%3Aissue+label%3A%22status%3A+accepting+prs%22)
- [x] Steps in
[CONTRIBUTING.md](https://github.com/JoshuaKGoldberg/all-contributors-for-repository/blob/main/.github/CONTRIBUTING.md)
were taken

## Overview

Runs `npx create-typescript-app --base everything --mode migrate`.

Adds a bit of unit testing while I'm here.

.eslintrc.cjs

@@ -7,8 +7,10 @@ module.exports = {
 	extends: [
 		"eslint:recommended",
 		"plugin:eslint-comments/recommended",
+		"plugin:n/recommended",
+		"plugin:perfectionist/recommended-natural",
 		"plugin:regexp/recommended",
-		"prettier",
+		"plugin:vitest/recommended",
 	],
 	overrides: [
 		{
@@ -18,18 +20,44 @@ module.exports = {
 		},
 		{
 			extends: [
-				"plugin:@typescript-eslint/recommended",
-				"plugin:typescript-sort-keys/recommended",
+				"plugin:jsdoc/recommended-typescript-error",
+				"plugin:@typescript-eslint/strict",
+				"plugin:@typescript-eslint/stylistic",
 			],
 			files: ["**/*.ts"],
 			parser: "@typescript-eslint/parser",
+			rules: {
+				// These off-by-default rules work well for this repo and we like them on.
+				"jsdoc/informative-docs": "error",
+				"logical-assignment-operators": [
+					"error",
+					"always",
+					{ enforceForIfStatements: true },
+				],
+				"operator-assignment": "error",
+
+				// These on-by-default rules don't work well for this repo and we like them off.
+				"jsdoc/require-jsdoc": "off",
+				"jsdoc/require-param": "off",
+				"jsdoc/require-property": "off",
+				"jsdoc/require-returns": "off",
+			},
+		},
+		{
+			files: "**/*.md/*.ts",
+			rules: {
+				"n/no-missing-import": [
+					"error",
+					{ allowModules: ["all-contributors-for-repository", "execa"] },
+				],
+			},
 		},
 		{
+			excludedFiles: ["**/*.md/*.ts"],
 			extends: [
-				"plugin:@typescript-eslint/recommended-requiring-type-checking",
-				"plugin:@typescript-eslint/strict",
+				"plugin:@typescript-eslint/strict-type-checked",
+				"plugin:@typescript-eslint/stylistic-type-checked",
 			],
-			excludedFiles: ["**/*.md/*.ts"],
 			files: ["**/*.ts"],
 			parser: "@typescript-eslint/parser",
 			parserOptions: {
@@ -41,19 +69,18 @@ module.exports = {
 			},
 		},
 		{
-			files: ["*.json", "*.jsonc"],
 			excludedFiles: ["package.json"],
+			extends: ["plugin:jsonc/recommended-with-json"],
+			files: ["*.json", "*.jsonc"],
 			parser: "jsonc-eslint-parser",
 			rules: {
 				"jsonc/sort-keys": "error",
 			},
-			extends: ["plugin:jsonc/recommended-with-json"],
 		},
 		{
-			files: ["**/*.md/*.ts"],
+			files: ["*.jsonc"],
 			rules: {
-				// These rules don't make sense in .md codeblocks
-				"@typescript-eslint/no-unused-vars": "off",
+				"jsonc/no-comments": "off",
 			},
 		},
 		{
@@ -65,9 +92,9 @@ module.exports = {
 			},
 		},
 		{
+			extends: ["plugin:yml/standard", "plugin:yml/prettier"],
 			files: ["**/*.{yml,yaml}"],
 			parser: "yaml-eslint-parser",
-			extends: ["plugin:yml/standard", "plugin:yml/prettier"],
 			rules: {
 				"yml/file-extension": ["error", { extension: "yml" }],
 				"yml/sort-keys": [
@@ -91,29 +118,37 @@ module.exports = {
 	plugins: [
 		"@typescript-eslint",
 		"deprecation",
-		"import",
+		"jsdoc",
 		"no-only-tests",
+		"perfectionist",
 		"regexp",
-		"simple-import-sort",
-		"typescript-sort-keys",
 		"vitest",
 	],
+	reportUnusedDisableDirectives: true,
 	root: true,
 	rules: {
-		// These off-by-default rules work well for this repo and we like them on.
-		"import/extensions": ["error", "ignorePackages"],
+		// These off/less-strict-by-default rules work well for this repo and we like them on.
+		"@typescript-eslint/no-unused-vars": ["error", { caughtErrors: "all" }],
 		"no-only-tests/no-only-tests": "error",
-		"simple-import-sort/exports": "error",
-		"simple-import-sort/imports": "error",
 
 		// These on-by-default rules don't work well for this repo and we like them off.
+		"no-case-declarations": "off",
+		"no-constant-condition": "off",
 		"no-inner-declarations": "off",
+		"no-mixed-spaces-and-tabs": "off",
 
 		// Stylistic concerns that don't interfere with Prettier
-		"padding-line-between-statements": "off",
 		"@typescript-eslint/padding-line-between-statements": [
 			"error",
 			{ blankLine: "always", next: "*", prev: "block-like" },
 		],
+		"perfectionist/sort-objects": [
+			"error",
+			{
+				order: "asc",
+				"partition-by-comment": true,
+				type: "natural",
+			},
+		],
 	},
 };

.github/CONTRIBUTING.md

@@ -22,16 +22,24 @@ There are two steps involved:
 
 ### Finding an Issue
 
-With the exception of very small typos, all changes to this repository generally need to correspond to an [open issue marked as `accepting prs` on the issue tracker](https://github.com/JoshuaKGoldberg/all-contributors-for-repository/issues?q=is%3Aopen+is%3Aissue+label%3A%22accepting+prs%22).
-If this is your first time contributing, consider searching for [unassigned issues that also have the `good first issue` label](https://github.com/JoshuaKGoldberg/all-contributors-for-repository/issues?q=is%3Aopen+is%3Aissue+label%3A%22accepting+prs%22+label%3A%22good+first+issue%22+no%3Aassignee).
+With the exception of very small typos, all changes to this repository generally need to correspond to an [unassigned open issue marked as `status: accepting prs` on the issue tracker](https://github.com/JoshuaKGoldberg/all-contributors-for-repository/issues?q=is%3Aissue+is%3Aopen+label%3A%22status%3A+accepting+prs%22+no%3Aassignee+).
+If this is your first time contributing, consider searching for [unassigned issues that also have the `good first issue` label](https://github.com/JoshuaKGoldberg/all-contributors-for-repository/issues?q=is%3Aissue+is%3Aopen+label%3A%22good+first+issue%22+label%3A%22status%3A+accepting+prs%22+no%3Aassignee+).
 If the issue you'd like to fix isn't found on the issue, see [Reporting Issues](#reporting-issues) for filing your own (please do!).
 
+#### Issue Claiming
+
+We don't use any kind of issue claiming system.
+We've found in the past that they result in accidental ["licked cookie"](https://devblogs.microsoft.com/oldnewthing/20091201-00/?p=15843) situations where contributors claim an issue but run out of time or energy trying before sending a PR.
+
+If an unasigned issue has been marked as `status: accepting prs` and an open PR does not exist, feel free to send a PR.
+Please don't post comments asking for permission or stating you will work on an issue.
+
 ### Sending a Pull Request
 
 Once you've identified an open issue accepting PRs that doesn't yet have a PR sent, you're free to send a pull request.
 Be sure to fill out the pull request template's requested information -- otherwise your PR will likely be closed.
 
-PRs are also expected to have a title that adheres to [commitlint](https://github.com/conventional-changelog/commitlint).
+PRs are also expected to have a title that adheres to [conventional commits](https://www.conventionalcommits.org/en/v1.0.0).
 Only PR titles need to be in that format, not individual commits.
 Don't worry if you get this wrong: you can always change the PR title after sending it.
 Check [previously merged PRs](https://github.com/JoshuaKGoldberg/all-contributors-for-repository/pulls?q=is%3Apr+is%3Amerged+-label%3Adependencies+) for reference.
@@ -81,3 +89,9 @@ Once all feedback is addressed and the PR is approved, we'll ensure the branch i
 
 Once your PR is merged, if you haven't yet been added to the [_Contributors_ table in the README.md](../README.md#contributors) for its [type of contribution](https://allcontributors.org/docs/en/emoji-key "Allcontributors emoji key"), you should be soon.
 Please do ping the maintainer who merged your PR if that doesn't happen within 24 hours - it was likely an oversight on our end!
+
+## Emojis & Appreciation
+
+If you made it all the way to the end, bravo dear user, we love you.
+Please include your favorite emoji in the bottom of your issues and PRs to signal to us that you did in fact read this file and are trying to conform to it as best as possible.
+💖 is a good starter if you're not sure which to use.

.github/DEVELOPMENT.md

@@ -13,13 +13,17 @@ pnpm install
 
 ## Building
 
-Run [TypeScript](https://typescriptlang.org) locally to type check and build source files from `src/` into output files in `lib/`:
+Run [**tsup**](https://tsup.egoist.dev) locally to build source files from `src/` into output files in `lib/`:
 
 ```shell
-pnpm build --watch
+pnpm build
 ```
 
-You should also see suggestions from TypeScript in your editor.
+Add `--watch` to run the builder in a watch mode that continuously cleans and recreates `lib/` as you save files:
+
+```shell
+pnpm build --watch
+```
 
 ## Formatting
 
@@ -29,20 +33,28 @@ It should be applied automatically when you save files in VS Code or make a Git
 To manually reformat all files, you can run:
 
 ```shell
-pnpm format:write
+pnpm format --write
 ```
 
 ## Linting
 
 This package includes several forms of linting to enforce consistent code quality and styling.
 Each should be shown in VS Code, and can be run manually on the command-line:
 
+- `pnpm lint` ([ESLint](https://eslint.org) with [typescript-eslint](https://typescript-eslint.io)): Lints JavaScript and TypeScript source files
 - `pnpm lint:knip` ([knip](https://github.com/webpro/knip)): Detects unused files, dependencies, and code exports
 - `pnpm lint:md` ([Markdownlint](https://github.com/DavidAnson/markdownlint)): Checks Markdown source files
-- `pnpm lint:package` ([npm-package-json-lint](https://npmpackagejsonlint.org/)): Lints the `package.json` file
+- `pnpm lint:package-json` ([npm-package-json-lint](https://npmpackagejsonlint.org/)): Lints the `package.json` file
 - `pnpm lint:packages` ([pnpm dedupe --check](https://pnpm.io/cli/dedupe)): Checks for unnecessarily duplicated packages in the `pnpm-lock.yml` file
 - `pnpm lint:spelling` ([cspell](https://cspell.org)): Spell checks across all source files
-- `pnpm lint` ([ESLint](https://eslint.org) with [typescript-eslint](https://typescript-eslint.io)): Lints JavaScript and TypeScript source files
+
+Read the individual documentation for each linter to understand how it can be configured and used best.
+
+For example, ESLint can be run with `--fix` to auto-fix some lint rule complaints:
+
+```shell
+pnpm run lint --fix
+```
 
 ## Testing
 
@@ -61,3 +73,24 @@ pnpm run test --coverage
 
 Note that [console-fail-test](https://github.com/JoshuaKGoldberg/console-fail-test) is enabled for all test runs.
 Calls to `console.log`, `console.warn`, and other console methods will cause a test to fail.
+
+### Debugging Tests
+
+This repository includes a [VS Code launch configuration](https://code.visualstudio.com/docs/editor/debugging) for debugging unit tests.
+To launch it, open a test file, then run _Debug Current Test File_ from the VS Code Debug panel (or press F5).
+
+## Type Checking
+
+You should be able to see suggestions from [TypeScript](https://typescriptlang.org) in your editor for all open files.
+
+However, it can be useful to run the TypeScript command-line (`tsc`) to type check all files in `src/`:
+
+```shell
+pnpm tsc
+```
+
+Add `--watch` to keep the type checker running in a watch mode that updates the display as you save files:
+
+```shell
+pnpm tsc --watch
+```

.github/ISSUE_TEMPLATE/01-bug.yml

@@ -29,5 +29,5 @@ body:
 description: Report a bug trying to run the code
 labels:
   - "type: bug"
-name: 🐛 Report a Bug
+name: 🐛 Bug
 title: "🐛 Bug: <short description of the bug>"

.github/ISSUE_TEMPLATE/03-feature.yml

@@ -23,5 +23,5 @@ body:
 description: Request that a new feature be added or an existing feature improved
 labels:
   - "type: feature"
-name: 🚀 Request a Feature
+name: 🚀 Feature
 title: "🚀 Feature: <short description of the feature>"

.github/SECURITY.md

@@ -0,0 +1,9 @@
+# Security Policy
+
+We take all security vulnerabilities seriously.
+If you have a vulnerability or other security issues to disclose:
+
+- Thank you very much, please do!
+- Please send them to us by emailing `git@joshuakgoldberg.com`
+
+We appreciate your efforts and responsible disclosure and will make every effort to acknowledge your contributions.

.github/actions/prepare/action.yml

@@ -1,6 +1,7 @@
 description: Prepares the repo for a typical CI job
 
 name: Prepare
+
 runs:
   steps:
     - uses: pnpm/action-setup@v2

.github/renovate.json

@@ -3,5 +3,6 @@
 	"automerge": true,
 	"internalChecksFilter": "strict",
 	"labels": ["dependencies"],
-	"stabilityDays": 3
+	"minimumReleaseAge": "3 days",
+	"postUpdateOptions": ["pnpmDedupe"]
 }

.github/workflows/build.yml

@@ -2,7 +2,7 @@ jobs:
   build:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - uses: ./.github/actions/prepare
       - run: pnpm build
       - run: node ./lib/index.js
@@ -11,7 +11,6 @@ name: Build
 
 on:
   pull_request: ~
-
   push:
     branches:
       - main

.github/workflows/compliance.yml

@@ -5,7 +5,7 @@ jobs:
       - uses: mtfoley/pr-compliance-action@main
         with:
           body-auto-close: false
-          ignore-authors: |
+          ignore-authors: |-
             allcontributors
             allcontributors[bot]
             renovate

.github/workflows/contributors.yml

@@ -0,0 +1,18 @@
+jobs:
+  contributors:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+      - uses: ./.github/actions/prepare
+      - env:
+          GITHUB_TOKEN: ${{ secrets.ACCESS_TOKEN }}
+        uses: JoshuaKGoldberg/all-contributors-auto-action@v0.3.2
+
+name: Contributors
+
+on:
+  push:
+    branches:
+      - main

.github/workflows/package.yml → .github/workflows/lint-knip.yml

@@ -1,16 +1,15 @@
 jobs:
-  package:
+  lint_knip:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - uses: ./.github/actions/prepare
-      - run: pnpm lint:package
+      - run: pnpm lint:knip
 
-name: Lint Package
+name: Lint Knip
 
 on:
   pull_request: ~
-
   push:
     branches:
       - main

.github/workflows/lint-markdown.yml

@@ -0,0 +1,15 @@
+jobs:
+  lint_markdown:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - uses: ./.github/actions/prepare
+      - run: pnpm lint:md
+
+name: Lint Markdown
+
+on:
+  pull_request: ~
+  push:
+    branches:
+      - main

.github/workflows/lint-package-json.yml

@@ -0,0 +1,15 @@
+jobs:
+  lint_package_json:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - uses: ./.github/actions/prepare
+      - run: pnpm lint:package-json
+
+name: Lint Package JSON
+
+on:
+  pull_request: ~
+  push:
+    branches:
+      - main