This repository has been archived by the owner on Dec 16, 2024. It is now read-only.
v4.0.0
Software Version 4.0.0
Released: March 2021
This is the GA4 release of Pinnacle 100, MG100, and MG100-CT (Contact Tracing).
New Features
- Based on nRF Connect SDK v1.5.0 and Zephyr v2.4.99
- Firmware updates via HTTPS from any AWS S3 host
- Unified code base for all build variants: Pinnacle 100 modem, MG100, and MG100-CT
- Integration of fault tracking with Memfault
- BLE advertise on button press
Bug Fixes
Various bug fixes and improvements
Known Issues
- SD card fails to initialize (MG100 only)[18504]
- Base project folder name must be less than 12 characters for Windows [18695]
Asset Description
480-00052 firmware is for Pinnacle 100 DVK.
480-00070 is for MG100.
- *_LTE-M.hex = AWS OOB demo firmware only (MCUboot image not included). Flash this image to the device to leave MCUboot unchanged. You can use this image to update a device that already has the MCUboot boot loader installed, v3.x (GA3) or newer.
- *_LTE-M_FOTA.bin = AWS OOB firmware binary used for firmware-over-the-air updates.
- *_LTE-M_full_image.hex = Complete AWS OOB firmware image including MCUboot boot loader. This is the binary used in manufacturing to flash a blank Pinnacle 100 modem. Use this if updating a device that has firmware 2.x (GA2) or earlier.
- *_NB-IoT* files = same as above, but are the LwM2M demo over NB-IoT.
- *_CT* files = same as above, but contact tracing firmware using LTE-M and AWS cloud connectivity.
Updating to This Release
If coming from 2.x firmware, flashing the full image via SWD is required.
nrfjprog -f NRF52 --program 480-00070-R4.0.0.1614788169_LTE-M_full_image.hex --chiperase --reset
If coming from 3.x firmware, BLE, UART, or SWD can be used to update.
Further Information
Further information relating to the Pinnacle 100 and its firmware is available from the Laird Connectivity website at https://www.lairdconnect.com/wireless-modules/cellular-solutions/pinnacle-100-modem