mikroSDK library for NO2 click

README.md

@@ -0,0 +1,94 @@
+![MikroE](http://www.mikroe.com/img/designs/beta/logo_small.png)
+
+---
+
+# NO2 Click
+
+- **CIC Prefix**  : NO2
+- **Author**      : Katarina Perendic
+- **Verison**     : 1.0.0
+- **Date**        : jul 2018.
+
+---
+
+### Software Support
+
+We provide a library for the NO2 Click on our [LibStock](https://libstock.mikroe.com/projects/view/2484/no2-click) 
+page, as well as a demo application (example), developed using MikroElektronika 
+[compilers](http://shop.mikroe.com/compilers). The demo can run on all the main 
+MikroElektronika [development boards](http://shop.mikroe.com/development-boards).
+
+**Library Description**
+
+The library initializes and defines the I2C bus driver and drivers that offer a choice for writing data in register.
+The library includes function for read NO2 data in ppm and function for read ADC data.
+
+Key functions :
+
+- ``` float no2_getNO2ppm() ``` - Function for read NO2 Data in ppm
+- ``` uint16_t no2_readADC() ``` - Function for read ADC sensor data
+- ``` void no2_writeByte( uint8_t reg, uint8_t _data ) ``` - Function writes one byte to the register.
+
+**Examples Description**
+
+The application is composed of three sections :
+
+- System Initialization - Initializes I2C bus and set AN pin as INPUT and RST pin as OUTPUT.
+- Application Initialization - Initializes I2C driver and device configuration.
+- Application Task - (code snippet) - Gets NO2 (Nitrogen dioxide) data as ppm value and logs to USBUART every 500ms.
+
+
+```.c
+void applicationTask()
+{
+    NO2_Value = no2_getNO2ppm();
+    FloatToStr( NO2_Value, demoText );
+    mikrobus_logWrite( "NO2 value : ", _LOG_TEXT );
+    mikrobus_logWrite( demoText, _LOG_TEXT );
+    mikrobus_logWrite( " ppm", _LOG_LINE );
+    Delay_ms( 500 );
+}
+```
+
+The full application code, and ready to use projects can be found on our 
+[LibStock](https://libstock.mikroe.com/projects/view/2484/no2-click) page.
+
+Other mikroE Libraries used in the example:
+
+- I2C
+- Conversions
+
+**Additional notes and informations**
+
+Depending on the development board you are using, you may need 
+[USB UART click](http://shop.mikroe.com/usb-uart-click), 
+[USB UART 2 Click](http://shop.mikroe.com/usb-uart-2-click) or 
+[RS232 Click](http://shop.mikroe.com/rs232-click) to connect to your PC, for 
+development systems with no UART to USB interface available on the board. The 
+terminal available in all Mikroelektronika 
+[compilers](http://shop.mikroe.com/compilers), or any other terminal application 
+of your choice, can be used to read the message.
+
+---
+### Architectures Supported
+
+#### mikroC
+
+| STM | KIN | CEC | MSP | TIVA | PIC | PIC32 | DSPIC | AVR | FT90x |
+|:-:|:-:|:-:|:-:|:-:|:-:|:-:|:-:|:-:|:-:|
+| x | x | x | x | x | x | x | x | x | x |
+
+#### mikroBasic
+
+| STM | KIN | CEC | MSP | TIVA | PIC | PIC32 | DSPIC | AVR | FT90x |
+|:-:|:-:|:-:|:-:|:-:|:-:|:-:|:-:|:-:|:-:|
+| x | x | x | x | x | x | x | x | x | x |
+
+#### mikroPascal
+
+| STM | KIN | CEC | MSP | TIVA | PIC | PIC32 | DSPIC | AVR | FT90x |
+|:-:|:-:|:-:|:-:|:-:|:-:|:-:|:-:|:-:|:-:|
+| x | x | x | x | x | x | x | x | x | x |
+
+---
+---