Use automatic module definitions in blinky

examples/blinky/CMakeLists.txt

@@ -19,7 +19,7 @@ endif()
 set(CMAKE_INCLUDE_CURRENT_DIR TRUE)
 
 
-set(HAL_COMP_LIST RCC GPIO CORTEX)
+set(HAL_COMP_LIST RCC GPIO CORTEX FLASH)
 set(CMSIS_COMP_LIST "")
 
 if(BLINKY_F4_EXAMPLE)
@@ -55,6 +55,7 @@ if(BLINKY_F4_EXAMPLE)
     target_link_libraries(stm32-blinky-f4
         HAL::STM32::F4::RCC
         HAL::STM32::F4::GPIO
+        HAL::STM32::F4::FLASH
         HAL::STM32::F4::CORTEX
         CMSIS::STM32::F407VG
         STM32::NoSys
@@ -68,6 +69,7 @@ if(BLINKY_F1_EXAMPLE)
     target_link_libraries(stm32-blinky-f1
         HAL::STM32::F1::RCC
         HAL::STM32::F1::GPIO
+        HAL::STM32::F1::FLASH
         HAL::STM32::F1::CORTEX
         CMSIS::STM32::F100RB
         STM32::NoSys
@@ -81,6 +83,7 @@ if(BLINKY_L0_EXAMPLE)
     target_link_libraries(stm32-blinky-l0
         HAL::STM32::L0::RCC
         HAL::STM32::L0::GPIO
+        HAL::STM32::L0::FLASH
         HAL::STM32::L0::CORTEX
         CMSIS::STM32::L053C8
         STM32::NoSys

examples/blinky/stm32f1xx_hal_conf.h

@@ -33,20 +33,25 @@ extern "C" {
 /* ########################## Module Selection ############################## */
 /**
   * @brief This is the list of modules to be used in the HAL driver
+  * 
+  * `stm32-cmake` automatically defines the `HAL_*_MODULE_ENABLED` variables
+  * when a driver is added to a project using `target_link_libraries`, so they
+  * don't need to be defined here
+  *
   */
 #define HAL_MODULE_ENABLED
 // #define HAL_ADC_MODULE_ENABLED
 // #define HAL_CAN_MODULE_ENABLED
 // #define HAL_CAN_LEGACY_MODULE_ENABLED
 // #define HAL_CEC_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
+// #define HAL_CORTEX_MODULE_ENABLED
 // #define HAL_CRC_MODULE_ENABLED
 // #define HAL_DAC_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
+// #define HAL_DMA_MODULE_ENABLED
 // #define HAL_ETH_MODULE_ENABLED
 // #define HAL_EXTI_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_GPIO_MODULE_ENABLED
+// #define HAL_FLASH_MODULE_ENABLED
+// #define HAL_GPIO_MODULE_ENABLED
 // #define HAL_HCD_MODULE_ENABLED
 // #define HAL_I2C_MODULE_ENABLED
 // #define HAL_I2S_MODULE_ENABLED
@@ -57,7 +62,7 @@ extern "C" {
 // #define HAL_PCCARD_MODULE_ENABLED
 // #define HAL_PCD_MODULE_ENABLED
 // #define HAL_PWR_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
+// #define HAL_RCC_MODULE_ENABLED
 // #define HAL_RTC_MODULE_ENABLED
 // #define HAL_SD_MODULE_ENABLED
 // #define HAL_SMARTCARD_MODULE_ENABLED

examples/blinky/stm32f4xx_hal_conf.h

@@ -33,6 +33,11 @@
 /* ########################## Module Selection ############################## */
 /**
   * @brief This is the list of modules to be used in the HAL driver 
+  * 
+  * `stm32-cmake` automatically defines the `HAL_*_MODULE_ENABLED` variables
+  * when a driver is added to a project using `target_link_libraries`, so they
+  * don't need to be defined here
+  *
   */
 #define HAL_MODULE_ENABLED  
 // #define HAL_ADC_MODULE_ENABLED
@@ -43,27 +48,27 @@
 // #define HAL_CRYP_MODULE_ENABLED
 // #define HAL_DAC_MODULE_ENABLED
 // #define HAL_DCMI_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
+// #define HAL_DMA_MODULE_ENABLED
 // #define HAL_DMA2D_MODULE_ENABLED
 // #define HAL_ETH_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
+// #define HAL_FLASH_MODULE_ENABLED
 // #define HAL_NAND_MODULE_ENABLED
 // #define HAL_NOR_MODULE_ENABLED
 // #define HAL_PCCARD_MODULE_ENABLED
 // #define HAL_SRAM_MODULE_ENABLED
 // #define HAL_SDRAM_MODULE_ENABLED
 // #define HAL_HASH_MODULE_ENABLED
-#define HAL_GPIO_MODULE_ENABLED
+// #define HAL_GPIO_MODULE_ENABLED
 // #define HAL_EXTI_MODULE_ENABLED
 // #define HAL_I2C_MODULE_ENABLED
 // #define HAL_SMBUS_MODULE_ENABLED
 // #define HAL_I2S_MODULE_ENABLED
 // #define HAL_IWDG_MODULE_ENABLED
 // #define HAL_LTDC_MODULE_ENABLED
 // #define HAL_DSI_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
+// #define HAL_PWR_MODULE_ENABLED
 // #define HAL_QSPI_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
+// #define HAL_RCC_MODULE_ENABLED
 // #define HAL_RNG_MODULE_ENABLED
 // #define HAL_RTC_MODULE_ENABLED
 // #define HAL_SAI_MODULE_ENABLED
@@ -75,7 +80,7 @@
 // #define HAL_IRDA_MODULE_ENABLED
 // #define HAL_SMARTCARD_MODULE_ENABLED
 // #define HAL_WWDG_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
+// #define HAL_CORTEX_MODULE_ENABLED
 // #define HAL_PCD_MODULE_ENABLED
 // #define HAL_HCD_MODULE_ENABLED
 // #define HAL_FMPI2C_MODULE_ENABLED

examples/blinky/stm32l0xx_hal_conf.h

@@ -33,25 +33,30 @@
 /* ########################## Module Selection ############################## */
 /**
   * @brief This is the list of modules to be used in the HAL driver 
+  * 
+  * `stm32-cmake` automatically defines the `HAL_*_MODULE_ENABLED` variables
+  * when a driver is added to a project using `target_link_libraries`, so they
+  * don't need to be defined here
+  *
   */
 #define HAL_MODULE_ENABLED
 // #define HAL_ADC_MODULE_ENABLED   
 // #define HAL_COMP_MODULE_ENABLED 
 // #define HAL_CRC_MODULE_ENABLED  
 // #define HAL_CRYP_MODULE_ENABLED  
 // #define HAL_DAC_MODULE_ENABLED   
-#define HAL_DMA_MODULE_ENABLED
+// #define HAL_DMA_MODULE_ENABLED
 // #define HAL_EXTI_MODULE_ENABLED
 // #define HAL_FIREWALL_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_GPIO_MODULE_ENABLED
+// #define HAL_FLASH_MODULE_ENABLED
+// #define HAL_GPIO_MODULE_ENABLED
 // #define HAL_I2C_MODULE_ENABLED
 // #define HAL_I2S_MODULE_ENABLED   
 // #define HAL_IWDG_MODULE_ENABLED
 // #define HAL_LCD_MODULE_ENABLED 
 // #define HAL_LPTIM_MODULE_ENABLED
 // #define HAL_PWR_MODULE_ENABLED  
-#define HAL_RCC_MODULE_ENABLED
+// #define HAL_RCC_MODULE_ENABLED
 // #define HAL_RNG_MODULE_ENABLED   
 // #define HAL_RTC_MODULE_ENABLED
 // #define HAL_SPI_MODULE_ENABLED   
@@ -63,7 +68,7 @@
 // #define HAL_SMARTCARD_MODULE_ENABLED 
 // #define HAL_SMBUS_MODULE_ENABLED 
 // #define HAL_WWDG_MODULE_ENABLED  
-#define HAL_CORTEX_MODULE_ENABLED
+// #define HAL_CORTEX_MODULE_ENABLED
 // #define HAL_PCD_MODULE_ENABLED 
 
 /* ########################## Oscillator Values adaptation ####################*/